|
Click pictures to see detail and/or add to shopping cart
|
|
|
|
|
3.5" square head pocket bolts (5/16" x 18 size). Works great with the pockets we sell!
|
3.75" square head pocket bolts (5/16" x 18 size). Works great with the pockets we sell!
|
|
BOLT-3.5
|
$1.75
|
BOLT-3.75
|
$1.75
|
|
|
|
|
|
4" square head pocket bolts (5/16" x 18 size). Works great with the pockets we sell!
|
4.5" square head pocket bolts (5/16" x 18 size). Works great with the pockets we sell!
|
|
BOLT-4
|
$1.75
|
BOLT-4.5
|
$1.75
|
|
|
|
|
|
Reconditioned original antique coarse thread pocket bolts
(16 threads per inch). These are usually needed for
antique (original) pocket irons.
|
Brass Slate Dowel pins.
One male and female section.
|
|
Call with size to order
|
$5.00 each
|
SLT/DWL
|
$9.95 (+$3 s/h)
|
|
|
|
|
|
1.75 inch slate to wood frame screw (phillips). 16 Gauge.
|
Under rail plates common on Gandy and other tables.
Order Set of 18 with screws - $55.95 (+$10s/h)
Order singles - $4.95 (+$6s/h)
|
|
SLT/SCR/1.75
|
$1.25
|
|
|
|
|
|
4.5" Square head rail bolt, 3/8" with 16 threads per inch (for finer thread slate nuts). Head is tapped for 10/32" screw for rosette.
|
4" Square head rail bolt, 3/8" with 16 threads per inch (for finer thread slate nuts). Head is tapped for 10/32" screw for rosette.
|
|
BOLT/SQ 4.5"
|
$9.75
|
BOLT/SQ 4"
|
$9.75
|
|
|
|
|
|
Round Head Rail Bolt
Hard to find, 14 threads per inch with head tapped for
10/32 screw for rosette.
Length 4 3/8" from head of bolt.
|
Original antique frame bolts. Square head, coarse threads. Specify length on ordering page.
|
|
BOLT-1
|
$15.95
|
FRAME/SQ
|
$25.00
|
|
|
|
|
|
Hardt o find slate screws with Phillips Head. These are like the originals in size, 16 gauge, 3 1/2" in length.
|
Barrel nut (to be inserted into slate) for rail bolt with 14 threads per inch (works with Bolt-1 on this page).
|
|
SLTSC/3.5
|
$1.75
|
BN-1
|
$6.95
|
|
|
|
|
|
Square nut (to be inserted into slate) for rail bolt with 16 threads per inch (works with Bolt/Sq 4" and 4.5" on this page)
|
This rail insert is usually missing from pool table rails requiring number 6 style pocket irons. It allows the pocket iron to fit correctly and limits the risk of the pocket bolt cracking the rail top.
|
|
SQN-1
|
$2.50
|
INSERT/1
|
$9.00
|
|
|
|
|
|
Blind screws for tables with rail blinds. Circa 1915-1930. These brass screws hold the blinds tight to the rails (in the center bottom edge). These screws are 1/4-20 size (if not replacing insert in rail bottom, recommended to run a 1/4-20 tap into existing insert).
|
Inserts for rail blind screws. These are for the underside of the rail in the center when using blind screws. Use a 3/8" wood bit to install.
|
|
RB/SC-1
|
$2.50
|
RB/Insert
|
$2.50
|
|
|
|
|
|
Insert for rail blind with matching screw (set). Use 3/8" wood bit to install insert. Pieces sold separately above.
|
Allen type screw for Recessed/Bosse Pockets.
|
|
INSERT/SCR
|
$4.75
|
Bosse/Screw
|
$15.00 (set of 12)
|
|
|
|
|
|
Hard to find thumbscrew for early Brunswick(tm) Convertible rail systems. Brass top with bolt.
|
Hard to find metal bracket for under rail
screw for convertible rails.
|
|
THM/B
|
$25.00
|
THM/B/BRKT
|
$15.00
|
|
|
|
|
|
Hardware kit for new style unfinished billiard legs we sell. Kit consists of 4 bolts, 4 nuts and 4 washers.
|
Eureka convertible rail system side pocket bracket.
|
|
HDW/KIT
|
$19.95
|
EUR/SD
|
$89.95 (+$10s/h)
|
|
|
|
|
|
Steel Underside rail fixture For Anniversary and Centennial tables.
|
Steel Circle Underside Rail fixture for Anniversary and Centennial tables.
|
|
AN/CN/PLT
|
$15.00
|
AN/CN/CIR
|
$15.00
|
|
|
|
|
|
Hard to find Lug for rail bolt (threaded for rail bolt and hole for slate screw to hold in place)
|
2.5 inch bolt compatible with LUG/SLT (rail bolt)
|
|
LUG/SLT
|
$17.50
|
2.5/BLT
|
$3.50
|
|
|
|
|
|
Hard to find L brackets used on blind aprons on 1930's tables.
|
Domed washer for rails
|
|
L/BRACK
|
$12.50
|
DMD/WASH
|
$1.50 each
|
|
|
|
|
|
Next
|
 "Antique Pool Table Parts - Ivory & Pearl - MOP-1")
. 16 Gauge.)
)
)
)
)
){kind=link}