Classic Billiards - Specializing in Authentic Reproduction PartsAntique Pool Tables

Call Ken Hash at 410-256-8388 (Mon-Sat 9am-6pm) or E-mail info@classicbilliards.net

Antique Pool Tables

Antique Pool Table Parts

Reproduction  Parts & Accessories
COIN OP PARTS

Call Ken Hash at (410) 256-8388 or send us email
2813 Belair Rd Suite 309 Fallston, MD 21047 (by appointment only)

Click pictures to see detail and/or add to shopping cart


Rubber Gully Boots (set of 6)

Plastic Gully Boots (set of 6)

GB/RB

$39.95 (+$17s/h)

GLY/BT/SET

$20.00 (+$12s/h)


3 inch pocket liners (set of six).

4 inch pocket liners (set of six).

PKT/L/3in

$16.50 (+$12 s/h)

PKT/L/4in

$18.50 (+$12 s/h)


Set of six heavy duty black rubber 3" pocket liners.

Set of six heavy duty black rubber 4" pocket liners.

HD/RB3

$22.95 (+$12 s/h)

HD/RB4

$24.95 (+$12 s/h)


Red, 4 inch pocket liner (set of six).

Heavy Rubber Gully Boot/Liner.  Set of six.

PKT/LINER/4

$19.50 (+$12 s/h)

RBR/GUL/BOOT

$34.95 (+$17 s/h)


Satin copper/bronze finish heavy duty 6 1/4"
diameter leg leveler.
Set of four, 1/2" x 13 threads with nut plate. 
Each leveler has a rubber bottom trim.

Set of four leg levelers in Textured Bronze finish. 
6 1/4" wide at base.  Includes mounting plate/nut and (1/2" - 13TPI threaded stud) Rubber base ring.

CPR/LEG

$79.95 (+$17 s/h)

BR/TX/LV

$49.95 (+$17s/h)


Set of four leg levelers in high polished finish.  6 1/4" wide at base.  Includes mounting plate/nut and (1/2" - 13TPI threaded stud) Rubber base ring.

Round Rail plates.  1/4" x 1 3/4" wide.

CH/LV

$44.95 (+$17s/h)

RR/PL

$9.50 each


Set of four leg levelers (Brushed Aluminum) for Valley/Dynamo tables.  Heavy Duty Solid Aluminum construction.
4 3/4" diameter, 1/2" thread - 13TPI.

T Nut for Leg Levelers.  1/2" thread - 13TPI.

L/LV/SET

$79.95 (+$17s/h)

T/NUT/LL

$1.95 each


Valley Coin Chute End (6.5" with L Shaped End) for "C" style tables.  Also available in a 5" version.

Valley Coin Chute Extension (6.5") with straight end for "L" style tables. Also available in a 5" version.

CC/EXT 6.5"
CC/EXT 5"

$14.95

CC/STR/EXT 6.5"
CC/STR/EXT 5"

$14.95


Valley Tournament Magnetic Cue Ball

Valley Cat's eye Magnetic Cue Ball

TN/CB

$24.95

C/EYE

$24.95


Vertical Coin-slot mechanism for use on most coin operated tables.  Will take $0.50, $0.75 and $1.00; select which you would like when you order. Click below to order or see details.

Vertical Coin-slot mechanism for use on most coin operated tables.  Will take $0.50, $0.75, $1.00 and $1.25; select which you would like when you order. Click below to order or see details.

VCS/1 - $0.50
VCS/1 - $0.75
VCS/1 - $1.00

$59.95 (+$12 s/h)

VCS/2 - $0.50
VCS/2 - $0.75
VCS/2 - $1.00
VCS/2 - $1.25

$69.95 (+$12 s/h)


Valley Lock with Key
#54, #C512A and #2255 (used on coin drawers) available

Click on a style below to order.

KEY ONLY to the Valley Lock (available to the left).
#54, #C512A and #2255 (used on coin drawers) available.

Click on a style below to order.

#54
#C512A
#2255

$12.95

#54
#C512A
#2255

$3.75 (+$2 s/h)


Mechanical counter for Valley/Dynamo tables.

Lock and key set commonly used for coin
drawers for security.  Comes with two matched keys to lock.

MC/VD

$49.95 (+$12 s/h)

SEC/LK

$17.50


Valley Corner casting.
We usually have a selection of used Valley and Dynamo castings in this style.  Please call for price and availability.
Price is per each casting.  We usually have used Valley and Dynami corners, please call for availability.

Newer style flat Valley Corner rail casting.
Price is per each casting.

VCC/1

$110.00/each (+$17s/h)

FVCC/BK

$110.00 (+$17 s/h)


Used Valley "Black Cat" corner casting. 
Price is per each casting.

Older style original Dynamo (new old stock) corner casting.  We may have used casting as well, call or availability. 
Price is per each casting.

V/BC/CST

$65.00 (+$17 s/h)

D/CST/921

$110.00 (+$17 s/h)


Set of six factory 3" Valley Pocket Liners with screws.

Chrome twist pocket nails with smooth head to hold
pocket liners in place.  Set of 12.

VLY/LNR

$59.95 (+$12 s/h)

CT/PN

$10.00 (+$6 s/h)


Hard to find new: Old Stock Irving Kaye Coin Op Table door with original emblem. Comes with lock and keys. 42" wide 12" high

Trim sets made from extruded anodized aluminum.  Easy to install.
Cut and punched to fit any size table.  Each set comes with four pieces and screws.  (Made for Valley tables, Dynamo may need some alteration).

OS/IK/TBL/DOOR

$145.00 (+$40 s/h)

Click image for pricing info


Unbreakable ball dump roller.
Self lubricating made to exacting tolerances.

Pivot Block solves the problem of slop in the pivot arm.
Two piece kit with screws and installation instructions.

BDR/1

$19.95 (+$6s/h)

PVT/BLOK

$22.95 (+$12s/h)


Quarter strip, 11.75" x 1.5"
Supplied with peel off sticky back to mount on table top apron.

Corner casting bolts with matching washers. 
Sold in set of 8 bolts and 8 washers.

QS/COP

$4.95 (+$6s/h)

CST/BLT/SET

$12.95 (+$12s/h)


4.5" Rail bolts sold in set of 18.  When replacing rails, it is smart to replace the rail bolts also.
1/4 x 20 thread size (fits most modern tables)

Rail bolt for older Valley tables.  4" in length, 10/32 thread size.

RB/SET

$19.95 (+$12s/h)

VLY/BLT/RL

$3.50 each


Pocket buttons attach pocket liners to corner castings.
Standard (fits 1/4" hole).  Set of 8.

Pocket buttons attach pocket liners to corner castings.
Small (fits 3/16" hole).  Set of 8.

STAND/PB/SET

$10.50 (+$12s/h)

SMALL/PB/SET

$10.50 (+$12s/h)


Pocket screws used to hold pocket liners on tables with threaded corner castings (allen head, 10-32/1/2").  Set of 8.

Hardened and ground shoulder bolt holds ball dump tray in place.  Sold in sets of two with lockwashers.

PSCR/SET

$6.50 (+$6s/h)

SB/SET

$9.95 (+$6s/h)


Coin return spring

Leg bolts for attaching fiberglass legs to pool tables.
Each leg requires 4 bolts (sold in sets of 16).

CR/SP

$5.95 ($+6s/h)

LB/16

$19.95 (+$10s/h)


TNuts, sawtooth style, 1/4" size (industry standard).
Fits most pool table brand rails.  Sold in sets of 18.

Solid steel leg leveler TNut.  These are mounted into the under-side of fiberglass pool table legs and provide a thread for leg levelers.  1/2-13 thread, set of four.

ST/18/SET

$21.95 (+$12s/h)

LL/SET/4

$11.95 (+$6s/h)


Trim nails for attaching trim around ball view opening, triangle opening, coin recess and bottom trim.  Bag of 100.

Ball dump spring, highest quality, made in USA.  Double end loops last and last.

TRIM/100

$12.95 (+$10s/h)

BD/SPR

$4.95 (+$6s/h)


Black plastic 6 inch wide leg levelers with plastic nut.
Set of four.  1/2" thread - 13TPI.

Cushion facings (set of 12).  Die cut, premium
cushion facings for coin-op rail sets.

BLK/LL

$34.95 (+$17 s/h)

FC/C-OP

$10.50 (+$5s/h)


Irving Kaye large/oversize custom leather pocket liners.  Available in original Green, Black and Red.  Set of six. 
Click color below to order.  Part IR/KY/LNR.
These pocket liners replace the original Irving Kaye pocket liners that did not have Irving Kaye logo on top and hard a large lip.  Mostly used on earlier models.  If you are replacing liners that had an Irving Kaye logo on the top edge please see IRK/LNR that we offer.  These liners measure around the backside circumference approx 13" for corners, 8 1/2" for sides.  If you need help determining the proper pockets, please call.

Custom leather pocket liners for Irving Kaye (later model) tables replacing the original liners that had the Irving Kaye logo on top.  Picture shows a corner liner installed on an irving Kaye table.  If you have an earlier model table, click on the picture to see the side as well.  If you need help determining the proper style, feel free to call.  Available in Green, Black and Red.  Circumference around the backside of these liners are approx 10" corners/ 73/4" for sides.  Set of six.

Green
Black
Red

$130.00 (+$17s/h)

IRK/LNR - Green
IRK/LNR - Black
IRK/LNR - Red

$125.00 (+$12s/h)


 

 

Oversize black rubber, 4" tall pocket liners. These are larger than any rubber or plastic liners we sell in circumference (corner - 10 3/4"; side 7 1/2"). These will work on Irving Kaye tables with plastic liners with "IK" top logo. These are too small for early version Irving Kaye tables.
Set of 6 pocket liners.

 

 

OS/RBR/LNR

$59.95 (+$15 s/h)

 

 


Set of four leg levelers, 1/2" x 13TPI x 5" threaded stud.

Rubber base leg levelers with mounting plate (set of four).
Threaded stud is 1/2" x 13TPI, 2 3/4" in length

RBR/LL/5IN

$34.95 (+$12 s/h)

RBR/LL

$29.95 (+$12 s/h)


Set of six black plastic gully boots with lip for castings.

Valley Spots, peel and stick.  1" in diameter.  Pack of 12

GLY/BLK/PLT

$32.95 (+$12 s/h)

VL/SPOT

$5.95 (+$2 s/h)


Set of six black plastic gullys commonly used
on coin op tables including Irving Kaye.

Set of six black gullys with no tracks used on
many coin op tables.

TRM/GLY/BT

$22.95 (+$12 s/h)

GLY/NOTRK

$20.00 (+$12 s/h)


Hard to find Irving Kaye leg levelers.
$59.95 each.

For Irving Kaye tables -
Oak Disc copied after original metal disc for leveler to sit in.

IK/LL

$59.95 (+$12 s/h)

IK/LL/OK

$20.00 (+$12 s/h)


Wood push chute door for Valley tables.
Part WPD/VY.  Please select your size below.

Black hard plastic push chute door for Dynamo tables.
9" x 7 1/2"

Order 10 1/4" x 8 1/4"
Order 8 1/2" x 7"

$29.95 (+$12 s/h)
$34.95 (+$12 s/h)

BHP/DY

$39.95 (+$12 s/h)


Wood Coin Op Table Door.
5 3/4" x 5" at front

Wood Coin Op Table Door.
5 3/4" x 5" at front

WD/CP

$24.95 (+$12 s/h)

WD/CP/DR

$24.95 (+$12 s/h)


New Old Stock, old style flat 50 cent coin mech.  A great find if you are restoring an older coin op table.

Set of six black plastic ebonite pocket liners

CNOP/FLT

$79.95 (+$14 s/h)

EB/LNR

$19.95 (+$12 s/h)

 

 

 

Next

Ken Hash - 410-256-8388 - Call for appointment

info@classicbilliards.net

Mailing Address: 2813 Belair Rd Suite 309 Fallston, MD 21047